Thread View: uk.rec.cars.maintenance
2 messages
2 total messages
Started by gazzafield
Thu, 24 Nov 2005 16:17
Fitting a thermostat - Rover 214
Author: gazzafield
Date: Thu, 24 Nov 2005 16:17
Date: Thu, 24 Nov 2005 16:17
3 lines
164 bytes
164 bytes
Rover 214 K Series 16 Valve. I need to fit a new thermostat. Is this as much of a PITA as it looks considering it is stuck at the back under the inlet manifold?
Re: Fitting a thermostat - Rover 214
Author: Chris Street
Date: Thu, 24 Nov 2005 16:53
Date: Thu, 24 Nov 2005 16:53
9 lines
387 bytes
387 bytes
On Thu, 24 Nov 2005 16:17:53 +0000, gazzafield wrote: > Rover 214 K Series 16 Valve. I need to fit a new thermostat. Is this as > much of a PITA as it looks considering it is stuck at the back under the > inlet manifold? No, it's worse than it looks. Make sure that you can get a manifold seal at short notice as you could well need one - it's much easier if the manifold comes off.
Thread Navigation
This is a paginated view of messages in the thread with full content displayed inline.
Messages are displayed in chronological order, with the original post highlighted in green.
Use pagination controls to navigate through all messages in large threads.
Back to All Threads