How to disable BRK signal?

Thread View: comp.misc

1 messages

[T] Back to Threads [V] Tree View [G] Group Articles

1 total messages Started by tom@taux01.UUCP Wed, 23 Nov 1988 20:16

#3963

Author: tom@taux01.UUCP
Date: Wed, 23 Nov 1988 20:16

19 lines
556 bytes

Hello ,
On Sun-4/280 with console on ttya a brk signal is used
as an escape character to PROM prompt . This is very
inconvenient , because turning the console off or
disconnecting the RS232 wire brings the system down.

I tried to connect few pins on the RS232 cable but without
success.
How can i disable the brk signal (by software or hardware )?
Thanks in advance
Tom.


--
Gorodecki Tom.  National Semiconductor (IC)
6 Maskit st. P.O.B. 3007, Herzlia B,  46 104, Israel
UUCP:  {hplabs,pyramid,sun,decwrl}!nsc!taux01!tom
domain:  tom%taux01@nsc.com

Thread Navigation

This is a paginated view of messages in the thread with full content displayed inline.

Messages are displayed in chronological order, with the original post highlighted in green.

Use pagination controls to navigate through all messages in large threads.

Back to All Threads